Main Menu
Weather Station Menu
Lightning Radar Menu
Interests
Raspberry Pi Menu
Home Automation Menu
Gallery Menu
Visitor Counter
69.1%
United Kingdom of Great Britain and Northern Ireland
12.5%
United States of America
3.5%
IANA Special-Purpose Address
2.6%
France
2.0%
Singapore
Total:
56
Countries
|
Friday, 03 May 2024 16:04
|
Website now runing Joomla 4, Engima Machine Images added, Gatwick Aviation Museum Images added.Notice
Raspberry PI NTP Stratum 1 Server
Created: 26 October 2013This is one of my latest projects, a Stratum 1 NTP server. I found an extremely well written article on how to carry this out, by a chap called David Taylor.
The only change I made was the type of GPS unit I wanted to use. I had already built a lightning radar, which used a GPS unit (EM406A). One of the biggest issue was finding an outdoors housing for the GPS unit, and as I had come up with a solution, I decided to use the same unit.
This gave one interfacing issue with the PI, the 1 PPS, was only 2uS long, not enough for the PI to catch. The solution was to to put the signal through a signal stretcher. I found a NE555 timer kicking around and a few other components, and as you can see from below, the result. The beige RJ45 connector on the veroboard is for the connection to the GPS unit. This makes connecting and disconnecting the unit easy.
 |
 |
I have allowed plenty of space on the veroboard for an I2C project I'm also going to be starting on soon.
By making the veroboard the same foot print as the PI, means it's very easy to mount the board, no external box needed, A Raspberry PI with a Loft.
 |
 |
House Monitoring (deprecated)
Created: 12 June 2009A few (many) years ago I setup a 1-wire system around my house to monitor it's temperatures. All the data collected has been logged in to a MySQL database. However only recently have I decided to publish it for all to view. All this has been superseded, I have yet to give a description of the new system.
The following image is the Linux server and the computer systems UPS. A UPS is a must in Copthorne! Not a pretty case but it does the job. As it's housed in the garage, it needs to be vacuumed out regularly, spiders seem to enjoy living in there! The server is on the left of the picture and the UPS is on the right, which is an APC 2200.
The monitoring system is based around a 1-wire system, same type of network as the weather station. It is biased around two 1-wire masters. An Ethernet biased 1-wire master, HA7Net and a USB device connected to my Linux server (Fedora 11), The Linux server tends to run whatever is the latest version of Fedora!
The Ha7Net is located in the airing cupboard, see the following image.
The 1-wire temperature sensors have been attached to the network by a RJ45 couplers. I have made a good few of these now, although a little fiddly, as the wires within the coupler are not very long. But with some care it's not to difficult and produces a neat and easy to replace module, see the following image.
To measure the temperature of the water in the pipes, the closest I could do was to tie-wrap the sensor to the pipe, being that the pipe is made out of copper the temperature of the water must be very close to the temperature of the pipe.
I have also put a sensor in the Fish Tank, however I do not have an image of this. The main issue here was ensuring that the silicone sealant would not affect the fish, I used the sealant that can be brought from any good fish shop, do not use sealant from a DIY store, you will kill your fish!
Page 2 of 2
House Power Usage
House Temperatures
Word Cloud
Sun Up, Sun Down
 |  |  | |
| 05:21 | 12:56 | 20:32 | |
| Hassocks, West Sussex | |||
Moon Phase
