Main Menu
Weather Station Menu
Lightning Radar Menu
House Automation Menu
Other Interests Menu
Raspberry PI
Gallery Menu
Saturday, 25 June 2022 20:33
|
- 1. Rain Gauge Heater Project
- (Weather)
- Over the last few years, when snow has fallen the rain gauge stopped working. It then took a number of days before operation was resumed. When the gauge started working again, the water would be measured ...
- Created on 14 April 2014
- 2. Rain Gauge Heater
- (Station)
- Over the last few years, when snow has fallen the rain gauge stopped working. It then took a number of days before operation was resumed. When the gauge started working again, the water would be measured ...
- Created on 20 March 2014
- 3. Rain Gauge Heater Graphs
- (Station)
- The top two graphs show the temperatures of the rain gauge heater and the control module The lower two graphs show the heater status of the rain gauge. There are three independent heater circuits, which ...
- Created on 20 March 2014
- 4. Raspberry PI - OLED
- (Uncategorised)
- Here is a short video of my latest additions to my Raspberry PI. I have connected an i2c bus OLED display to show the current settings of the NTP system, i2c compass and the upcoming 1Wire rain gauge heater. ...
- Created on 15 December 2013
- 5. Weather Station
- (Station)
- ... 3 meter poll! But it gives an idea of the setup. My weather station, in all it's glory, well plus a few house bricks to stop it flying away. I have now mounted, screwed down the the rain gauge to a small ...
- Created on 26 March 2010
- 6. Soil Temperature Sensor Build
- (Station)
- ... end of the bus, the rain gauge does that, and secondly I was concerned that a spur of this length (apporx 2m) would cause reflections on the network. John used a PCB to mount his sensors on to, sad to ...
- Created on 25 March 2010
House Power Usage
