Main Menu
Weather Station Menu
Lightning Radar Menu
House Automation Menu
Other Interests Menu
Raspberry PI
Gallery Menu
Flag Counter
|
Sunday, 15 September 2019 11:10
|
- 1. Raspberry PI - OLED
- (Uncategorised)
- Here is a short video of my latest additions to my Raspberry PI. I have connected an i2c bus OLED display to show the current settings of the NTP system, i2c compass and the upcoming 1Wire rain gauge heater. ...
- Created on 15 December 2013
- 2. New Lightning Radar
- (Lightning Radar)
- ... t of the box are for the signal/power cable, this is the yellow one, and the other is for the 1wire sensor/s. I have fitted a temperature and humidity sensor on the housing, see the second picture, th ...
- Created on 15 September 2013
- 3. Weather Station Referb 2013
- (Station)
- ... splitter boxes. The idea of these boxes is to allow the 1wire bus to branch to the sensor and back, holding true to the way 1wire network needs to laid out/connected. The other advantage of this, is tha ...
- Created on 14 September 2013
- 4. VLF Amplifier Temp and Humidity
- (Lightning Radar)
- ... Amplifer was in a water proof box, well not, it leaked! If I had known at the start I would have been able to save it, so this time I have put a 1Wire temperature and humidity sensor, which I am monitoring, ...
- Created on 28 June 2013
- 5. 1-Wire Tempreature Sensor Build
- (Projects)
- As you will see from the various stats on this site I have a number of temperature sensors around the house. These sensors are all 1Wire temperature sensors connected to either the house Linux machine, ...
- Created on 06 March 2013
- 6. 1 Wire Soil Temperature Sensor
- (Search - Web Links / 1-Wire)
- Where I found the design for the 1Wire Soil temperature sensor. ...
- Created on
House Power Usage
